Wiretap phone adapter using the phone line as a current source

Wiretap phone adapter using the phone line as a current source

Adapter wiretap, using the phone line as a current source, monitoring both sides of the conversation and transmitting them to a remote receiver.

It uses the UHF band, and the stability is achieved using a Quartz crystal. Incredibly minuscule and powerful.

More details


$79.95

ADU-V2

Add to wishlist

Receptacle "adapter" wiretap, Phone spy bug

 

The telephone wiretap is concealed in a standard telephone adapter and installs in seconds, using the original phone wall jack. When using telephone transmitters, you should note that there is no need for battery power. All power for a telephone transmitter is derived from the phone line power. That is what powers all phone surveillance transmitters for communication monitoring.

The Adapter Transmitter's optional design allows the communications surveillance of either a dedicated instrument or any extension on the telephone line. It transmits when the telephone's headphone or handphone circuit has been lifted, and the exchange current flows.

The Telephone Adapter Transmitter is powered by the energy of the phone line. Therefore, our telephone wiretap can transmit its communications surveillance indefinitely.

 

Features:

  • The device's dimensions are very compact. Easier to conceal.
  • No external antenna.
  • No battery used.
  • Our transmitters are more powerful than any others. 
  • High-quality precise PCB. Active and passive SMT elements from leading worldwide brands.

Specifications

  • Working Voltage: Phone line, without using batteries.
  • Dimensions: 1cm x 1cm x 3cm. EXTRA SMALL listening device design, made for phone surveillance and for places where the unit is difficult to conceal.
  • Stability: The transmitter has 3 x RF stages buffered output for stability.
  • Frequency: True NFM (Narrow Band FM - Frequency range approximately  433.x (Quartz Crystal Controlled ).
  • Distance: Long transmitting range. Penetrates through walls and ceilings.
  • Safety: Our unique transmitters are using a special material for encapsulating, for safety.
  • Power: Up to 50mW RF output.
  • Audio: High-level difference between noise and the transmitted sounds. 
  • Antenna: Internal.
  • Adjustments: No adjustments are required.

The unit comes fully assembled and ready for using, as shown in the picture.

Just connect it to the line and it will begin to transmit.

 

The package includes:

1 X Adapter type wiretap Transmitter.

1 X connecting cord.

Note:

It is not available for Office Type Phones, PBX, and Modem Cable. On the DSL or ADSL network, it has to be installed after the filter (i.e. between the filter and the land phone or cordless phone base).

Please check your line type before ordering.

  • Weight 0.15

No customer reviews for the moment.

Write your review

Wiretap phone adapter using the phone line as a current source

Wiretap phone adapter using the phone line as a current source

Adapter wiretap, using the phone line as a current source, monitoring both sides of the conversation and transmitting them to a remote receiver.

It uses the UHF band, and the stability is achieved using a Quartz crystal. Incredibly minuscule and powerful.

Write your review

Cart  

No products

$0.00 Shipping
$0.00 Total

Cart Check out

PayPal